[. . . ] Select a sturdy, well-ventilated, dust-free area, away from direct sunlight to position the product. Connect the power cord between the product and a grounded AC outlet, and then turn on the product. [. . . ] NOTE: If the HP Smart Install program fails, disconnect the USB cable, turn the product off and then on again, and then insert the product CD into your computer. If you did not register your product during software installation go to www. The HP Help and Learn Center and other documentation are on the CD that came with the product or in the HP Program folder on your computer. The HP Help and Learn Center is a product help tool that provides easy access to product information, HP product Web support, troubleshooting guidance, and regulatory and safety information. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. hP shall not be liable for technical or editorial errors or omissions contained herein. Part number: CE65-07 Edition , 0/0 FCC Regulations This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 5 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Use of a shielded interface cable is required to comply with the Class B limits of Part 5 of FCC rules. Hewlett-Packard shall not be liable for any direct, indirect, incidental, consequential, or other damage alleged in connection with the furnishing or use of this information. [. . . ]